M3-3 Channel Field Mixer

M3 - 3 Channel Field Production and ENG Mixer
The PSC M3 field mixer includes a feature set similar to the M4mkII. Standard are 3 high quality, transformer-balanced XLR inputs and 2 (L/R) stereo paired XLR outputs capable of both mic and line level operation. Output limiters eliminate transient peaking caused by signal overload. The dual limiters can either be used independently or "gang" them together for applying the limiter to stereo signals.

The PSC M3 is capable of powering via AA batteries. 48 Volt phantom power is provided, allowing complete compatibility with condenser microphones. Dual multipin (beta) connector provides a single, complete interface bettween the M3 and beta cameras. The multipin connector provides audio input and output signal flow as well as tape return signal flow for monitoring. A convenient on board slate microphone is standard and a boom pole remote control (included) allows engineers the freedom of adjusting record levels while handling the boom pole. Designed and manufactured for ENG, EFP, digital recording, desktop recording and editing, the PSC M3 proves to be a cost effective, flexible portable mixer.

 
Features
 
•  Balanced Inputs and Outputs
High quality transformer-balanced XLR inputs and outputs result in prestine audio with low noise and RF interference. Balanced wiring allows longer cable runs without electromagnetic and radio frequency interference.
•  Mic / Line Level Operation
All inputs and outputs are switchable for compatibility with both, microphone and line level devices. This gives the mixer the flexibility needed to interface with microphones, DAT recorders, professional and consumer video cameras etc.
•  Phantom Power
48 Volt phantom power is provided allowing compatibility with professional level condenser microphones.
•  Input Channel Ganging
Channels 3 and 4 can be linked for stereo recording using 2 microphones in either M-S or X-Y configurations. The "Gang" switch links inputs 3 and 4 and both input levels are then controlled by Pot 4.
•  Slate Microphone
The momentary "Slate" button activates a built in slate microphone for recording notes and information related to editing.
•  Beta Cam Interface
2 built in multi I/O interface conveniently connects the M3 with a Beta Cam. This single connector accurately provides both, audio input and output as well as tape returns for confidence monitoring.
•  Boom Pole Remote
A handy boom-pole remote control (included), attaches to any boom pole. This allows sound engineers to adjust recording level without reaching for the mixer.
•  Switchable Limiting
The M3 provides limiting on the output stage. "Seperate" and "Ganged" switches allow independent or linked operation of both limiters.
•  Low Cut Filter
Low cut filters elliminate low frequency noise and rumble.
•  Comprehensive Metering
The LCD Peak meters are custom designed to emulate the peak reading attributes found in many Beta Cams. This ensures the meters accuracy no matter how the mixer and camera are connected.



 

Specifications
Inputs 3 - Balanced XLR inputs female
Outputs 2 - Stereo Paired Balanced XLR Output
1 - 3.5mm (1/8") transcription microphone output
 
Monitor / Headphone Out 1 - 1/4" TRS Phone
ALT I/O 2 - Multi Pin Hiros Beta-Cam I/O - single connection I/O provides left and right stereo input and output and tape returns for confidence monitoring
Link Input / Output No
Impedance not specified by manufacturer
Gain Global Gain: 80dB at detent on master
Hum & Noise Signal to Noise: 130dB EIN 150 Ohms
Frequency Response 20Hz to 20kHz +/- 1dB
Distortion Distortion: 00.08% THD
Metering LCD Display
Control Voltage Out No
Phantom Power +48V DC
Operating Temperature -4 to +158 degrees F (-20 to +70 degrees C)
Power 6x AA Alkaline
Dimensions 8.600 x 6.825 x 2.000" (21.8 x 17.3 x 5cm) (W x D x H)
Weight 3lbs. (1.6 kg)